PrimeGrid
Please visit donation page to help the project cover running costs for this month

Toggle Menu

Join PrimeGrid

Returning Participants

Community

Leader Boards

Results

Other

drummers-lowrise
1) Message boards : Problems and Help : Running dual 1080ti and 7920X (Message 134333)
Posted 327 days ago by bigsinkyProject donor
Could some who is knowledgeable with app_config.xml have a look and tell me if it looks ok. I used to run PPS seive only for the credits but now i want find primes and have started to use both the 1080ti to run all the CUDA appplications as well. just wondering if the times for processing genefer WU is about right. both gpus run at 100% load @ about 50C. the CPUs are using mt and run ok at 100% load @ 65c. This is my app_info.xml file sorry its pretty long. just under 3 hours for gen 20 and 10 hours for gen 21

TIA

bigsinky

<app_config>

<app>
<name>pps_sr2sieve</name>
<gpu_versions>
<gpu_usage>0.25</gpu_usage>
<cpu_usage>0.25</cpu_usage>
</gpu_versions>
</app>

<app>
<name>llr321</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llr321</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrCUL</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llrCUL</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrESP</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>

<app_name>llrESP</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrGCW</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llrGCW</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrPSP</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llrPSP</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrPPS</name>
<max_concurrent>1</max_concurrent>
<fraction_done_exact>1</fraction_done_exact>
</app>
<app_version>
<app_name>llrPPS</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrPPSE</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>2</max_concurrent>
</app>
<app_version>
<app_name>llrPPSE</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 2</cmdline>
<avg_ncpus>2</avg_ncpus>
<max_ncpus>2</max_ncpus>
</app_version>

<app>
<name>llrMEGA</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>2</max_concurrent>
</app>
<app_version>
<app_name>llrMEGA</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 2</cmdline>
<avg_ncpus>2</avg_ncpus>
<max_ncpus>2</max_ncpus>
</app_version>

<app>
<name>llrSOB</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llrSOB</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrSR5</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llrSR5</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrTPS</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>2</max_concurrent>
</app>
<app_version>
<app_name>llrTPS</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 2</cmdline>
<avg_ncpus>2</avg_ncpus>
<max_ncpus>2</max_ncpus>
</app_version>

<app>
<name>llrTRP</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llrTRP</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>llrWOO</name>
<fraction_done_exact>1</fraction_done_exact>
<max_concurrent>1</max_concurrent>
</app>
<app_version>
<app_name>llrWOO</app_name>
<plan_class>mt</plan_class>
<cmdline>-t 4</cmdline>
<avg_ncpus>4</avg_ncpus>
<max_ncpus>4</max_ncpus>
</app_version>

<app>
<name>ap26</name>
</app>
<app_version>
<app_name>ap26</app_name>
<plan_class>OCL_cuda_AP27</plan_class>
<cmdline>-compute</cmdline>
</app_version>


<app>
<name>genefer_extreme</name>
</app>
<app_version>
<app_name>genefer_extreme</app_name>
<plan_class>OCLcudaGFNEXTREME</plan_class>
<cmdline>-compute</cmdline>
</app_version>

<app>
<name>genefer_wr</name>
</app>
<app_version>
<app_name>genefer_wr</app_name>
<plan_class>OCLcudaGFNWR</plan_class>
<cmdline>-compute</cmdline>
</app_version>


<app>
<name>genefer15</name>
</app>
<app_version>
<app_name>genefer15</app_name>
<plan_class>OCLcudaGFN15</plan_class>
<cmdline>-compute</cmdline>
</app_version>

<app>
<name>genefer16</name>
</app>
<app_version>
<app_name>genefer16</app_name>
<plan_class>OCLcudaGFN16</plan_class>
<cmdline>-compute</cmdline>
</app_version>

<app>
<name>genefer17low</name>
</app>
<app_version>
<app_name>genefer17low</app_name>
<plan_class>OCLcudaGFN17LOW</plan_class>
<cmdline>-compute</cmdline>
</app_version>


<app>
<name>genefer17mega</name>
</app>
<app_version>
<app_name>genefer17mega</app_name>
<plan_class>OCLcudaGFN17MEGA</plan_class>
<cmdline>-compute</cmdline>
</app_version>

<app>
<name>genefer18</name>
</app>
<app_version>
<app_name>genefer18</app_name>
<plan_class>OCLcudaGFN18</plan_class>
<cmdline>-compute</cmdline>
</app_version>

<app>
<name>genefer19</name>
</app>
<app_version>
<app_name>genefer19</app_name>
<plan_class>OCLcudaGFN19</plan_class>
<cmdline>-compute</cmdline>
</app_version>

</app_config>
2) Message boards : Problems and Help : how to get credit back on a reset project (Message 126765)
Posted 586 days ago by bigsinkyProject donor
I cant remove and reattach. the remove button is greyed out.


Did you select PrimeGrid before trying to click no the remove button? If you have only one project, it's not obvious that you need to select that project prior to clicking on the buttons.

Are you using an account manager such as "BOINCStats BAM!" ? If so, first tell your BOINC client not to use the account manager.

If all else fails, you can uninstall BOINC, delete the BOINC data directory, and then reinstall BOINC.


Thanks i got it sorted
3) Message boards : Problems and Help : how to get credit back on a reset project (Message 126752)
Posted 586 days ago by bigsinkyProject donor
Does this

>Once you attach your computer to PrimeGrid again, it will show the correct credit. You do, however, need to use the SAME EMAIL ADDRESS as you used originally. Account identification is based on your email address.

mean you can't change your email address without a loss of credits?


I cant reattach thats the point. i have closed down boinc. rebooted computer and restarted boinc. PG still shows zero, will not download any tasks and will not show correct credit amount[/quote]
4) Message boards : Problems and Help : how to get credit back on a reset project (Message 126751)
Posted 586 days ago by bigsinkyProject donor
snip
5) Message boards : Problems and Help : how to get credit back on a reset project (Message 126750)
Posted 586 days ago by bigsinkyProject donor
I cant remove and reattach. the remove button is greyed out.
6) Message boards : Problems and Help : how to get credit back on a reset project (Message 126726)
Posted 586 days ago by bigsinkyProject donor
i reset PG by mistake and now my credits show 0. i had 137M. i cant do anything with the project. it just sits there. it wont take new tasks and i cant delete it. any suggestions on how to get my credits back
7) Message boards : General discussion : ARM application for Raspberry PI (Message 119439)
Posted 799 days ago by bigsinkyProject donor
This has probably been asked before but are there any plans for a Linux based ARM application that could be used to run PG on a Raspberry PI?

Thanks

Neil
[Return to PrimeGrid main page]
DNS Powered by DNSEXIT.COM
Copyright © 2005 - 2020 Rytis Slatkevičius (contact) and PrimeGrid community. Server load 3.55, 3.33, 2.85
Generated 21 Sep 2020 | 10:01:48 UTC