Join PrimeGrid
Returning Participants
Community
Leader Boards
Results
Other
drummerslowrise

Message boards :
Proth Prime Search :
(x)(G)FN Divisibility Testing
Author 
Message 
JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

(x)(G)FN Divisibility Testing  a request for help!
xGFN = extended Generalized Fermat Number
We're searching for 3 types of divisors
1. Fermat Number divisors
2. Generalized Fermat Number divisors
3. extended Generalized Fermat Number divisors
The recent Mega Prime (3*2^5082306+1) found in the 321 Prime Search is a Proth prime and thus, we are testing it for (x)(G)FN divisibility. On a single core, this test could take 4 to 6 months to complete. Using certain "shortcuts", we could bring it down to 2 1/2 months.
However, the fastest method, while not the most efficient use of resources, is to split the work up over 42 cores. This would allow for completion in about 5 days. To expedite the testing, we are asking for help.
The software used for testing is openPFGW. It's available for both Linux and Windows. It can be downloaded here: openPFGW
There is no checkpointing for these single tests; therefore, it will need to run uninterrupted to completion.
For Windows users, copy and paste one of the command lines below into the Standard "PFGW compatible" command line field and click start. For Linux users, just start in a terminal and run one of the command lines below.
If you have available resources (P4 3.4GHz, C2D, C2Q, or Phenom or better) and would like to help, please select a test below. This thread will serve as the reservation thread as well. Just post which test you'd like to reserve.
Upon completion of the test, upload the 3_5082306_#.gfi and #_#.log files here. Select upload in the Menu on the top right of the page.
If all goes well and everything is reserved in the next couple of days, we can have this wrapped up within a week. Thank you for your help.
Times are based on a 1015 hour completion time for an LLR test on 3*2^5082306+1.
4060 hour tests
pfgw l2_1.log gxo2,1 a2 q3*2^5082306+1 Benva COMPLETE (none)
pfgw l3_1.log gxo3,1 a2 q3*2^5082306+1 [SGSPEG] BerndBrot COMPLETE
pfgw l5_1.log gxo5,1 a2 q3*2^5082306+1 PuzzlePeter COMPLETE
pfgw l6_1.log gxo6,1 a2 q3*2^5082306+1 PuzzlePeter COMPLETE
pfgw l7_1.log gxo7,1 a2 q3*2^5082306+1 PuzzlePeter COMPLETE
pfgw l8_1.log gxo8,1 a2 q3*2^5082306+1 Sysadm@Nbg COMPLETE
pfgw l10_1.log gxo10,1 a2 q3*2^5082306+1 [SGSPEG]SDI COMPLETE (none)
pfgw l11_1.log gxo11,1 a2 q3*2^5082306+1 gamer007 COMPLETE
pfgw l12_1.log gxo12,1 a2 q3*2^5082306+1 pschoefer COMPLETE (none)
80120 hour tests
pfgw l3_2.log gxo3,2 a2 q3*2^5082306+1 pschoefer COMPLETE
pfgw l4_3.log gxo4,3 a2 q3*2^5082306+1 Sysadm@Nbg COMPLETE
pfgw l5_2.log gxo5,2 a2 q3*2^5082306+1 PuzzlePeter COMPLETE
pfgw l5_3.log gxo5,3 a2 q3*2^5082306+1 [SGSPEG]SDI COMPLETE
pfgw l5_4.log gxo5,4 a2 q3*2^5082306+1 pan2000 COMPLETE
pfgw l6_5.log gxo6,5 a2 q3*2^5082306+1 [SGSPEG]Saerdna COMPLETE
pfgw l7_2.log gxo7,2 a2 q3*2^5082306+1 [SGSPEG] Yamazaki COMPLETE
pfgw l7_3.log gxo7,3 a2 q3*2^5082306+1 Scott Brown COMPLETE (none)
pfgw l7_4.log gxo7,4 a2 q3*2^5082306+1 Mike COMPLETE
pfgw l7_5.log gxo7,5 a2 q3*2^5082306+1 Mike COMPLETE
pfgw l7_6.log gxo7,6 a2 q3*2^5082306+1 Mike COMPLETE
pfgw l8_3.log gxo8,3 a2 q3*2^5082306+1 [SGSPEG] Yamazaki COMPLETE
pfgw l8_5.log gxo8,5 a2 q3*2^5082306+1 Mike COMPLETE
pfgw l8_7.log gxo8,7 a2 q3*2^5082306+1 Mike COMPLETE
pfgw l9_2.log gxo9,2 a2 q3*2^5082306+1 Mike COMPLETE
pfgw l9_5.log gxo9,5 a2 q3*2^5082306+1 Mike COMPLETE
pfgw l9_7.log gxo9,7 a2 q3*2^5082306+1 pschoefer COMPLETE
pfgw l9_8.log gxo9,8 a2 q3*2^5082306+1 Lennart COMPLETE
pfgw l10_3.log gxo10,3 a2 q3*2^5082306+1 PrimeGrid COMPLETE
pfgw l10_7.log gxo10,7 a2 q3*2^5082306+1 PrimeGrid COMPLETE
pfgw l10_9.log gxo10,9 a2 q3*2^5082306+1 [SG]marodeur6 COMPLETE
pfgw l11_2.log gxo11,2 a2 q3*2^5082306+1 [SG]marodeur6 COMPLETE
pfgw l11_3.log gxo11,3 a2 q3*2^5082306+1 [SG]marodeur6 COMPLETE
pfgw l11_4.log gxo11,4 a2 q3*2^5082306+1 [SG]marodeur6 COMPLETE
pfgw l11_5.log gxo11,5 a2 q3*2^5082306+1 [SG]marodeur6 COMPLETE
pfgw l11_6.log gxo11,6 a2 q3*2^5082306+1 [SG]marodeur6 COMPLETE
pfgw l11_7.log gxo11,7 a2 q3*2^5082306+1 Lennart COMPLETE
pfgw l11_8.log gxo11,8 a2 q3*2^5082306+1 Lennart COMPLETE
pfgw l11_9.log gxo11,9 a2 q3*2^5082306+1 Lennart COMPLETE
pfgw l11_10.log gxo11,10 a2 q3*2^5082306+1 Lennart COMPLETE
pfgw l12_5.log gxo12,5 a2 q3*2^5082306+1 Lennart COMPLETE
pfgw l12_7.log gxo12,7 a2 q3*2^5082306+1 Lennart COMPLETE
pfgw l12_11.log gxo12,11 a2 q3*2^5082306+1 Lennart COMPLETE
GF Results
3*2^5082306+1 is a Factor of GF(5082303,3)!!!! (202011.866000 seconds)
3*2^5082306+1 is a Factor of GF(5082305,5)!!!! (1238.488832 seconds)
3*2^5082306+1 is a Factor of GF(5082304,8)!!!! (1561.071728 seconds)
3*2^5082306+1 is a Factor of GF(5082305,11)!!!! (205798.451000 seconds)
xGF Results
3*2^5082306+1 is a Factor of xGF(5082305,5,3)!!!! (334860.541000 seconds)
3*2^5082306+1 is a Factor of xGF(5082302,7,4) !!!! (1447.827456 seconds)
3*2^5082306+1 is a Factor of xGF(5082304,8,3)!!!! (319349.797000 seconds)
3*2^5082306+1 is a factor of xGF(5082305,8,5)!!!! (1529.506816 Seconds)
3*2^5082306+1 is a Factor of xGF(5082305,9,5)!!!! (1733.716816 seconds)
3*2^5082306+1 is a Factor of xGF(5082304,9,8)!!!! (942.306640 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,11,3)!!!! (281658.843000 seconds)
3*2^5082306+1 is a Factor of xGF(5082302,11,5)!!!! (299775.602000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,11,8)!!!! (800.930656 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,11,9)!!!! (715.380656 seconds)
3*2^5082306+1 is a Factor of xGF(5082303,12,7)!!!! (754921.205000 seconds)
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,3,2)!!!! (389561.594000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,4,3)!!!! (2051.731696 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,5,2)!!!! (425216.233000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,5,4)!!!! (579596.208000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,6,5)!!!! (443921.688000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,7,2)!!!! (286408.437000 seconds)
3*2^5082306+1 is a factor of xGF(5082274,7,5) !!!! 1209.948912 seconds
3*2^5082306+1 is a factor of xGF(5082274,7,6) !!!! (151.113360 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,8,7)!!!! (1900.356816 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,9,2)!!!! (1814.426816 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,9,7)!!!! (287682.716000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,10,3)!!!! (391912.438000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,10,7)!!!! (391940.578000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,10,9)!!!! (486428.766000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,11,2)!!!! (489581.705000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,11,4)!!!! (281660.359000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,11,6)!!!! (440029.000000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,11,7)!!!! (726.596640 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,11,10)!!!! (750482.487000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,12,5)!!!! (755207.783000 seconds)
3*2^5082306+1 is a Factor of xGF(5082274,12,11)!!!! (375898.531000 seconds)
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

Hi John,
after some 48 hours my 1. file seemed to be finished...
(pfgw l7_2.log gxo7,2 a2 q3*2^5082306+1)
but then it started again for a second run...
is that ok ?
regards
My apologies! I completely forgot to mention. :( The second run is needed.
The 80120 hour tests actually have two runs...one for each power.
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

The second run is needed. The 80120 hour tests actually have two runs...one for each power.
My personal forecast sees
 the short GFNtest at 98 hours
 the long at 97 hours, but if there is a second run, it will be at ~190 hours
My machine:
AMD Phenom 9550 running Ubuntu Linux 64bit
Strange...I had spec'd out Phenom's to come in at 15 hours for a normal LLR test at n=5M...so that would put them in the upper limits. However, yours is coming in 38 hours over the short test and 70 hours over the long test. That's a big difference. Any other users with Phenom's experiencing this?
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

I ve finished my range, but I have no 3_5082306_#.gfi file and #_#.log is empty, is it normal?
I was just about to post about this...sadly, yes, this is normal. I discovered that I missed a switch in the command line. This switch produced the 3_5082306_#.gfi. It was a "nicetohave" file but not mandatory. We can still get everything we need from the log file.
If no log file was produced, that means there was no divisibility. The test is complete. A log file will only be produced when there is a divisibility.
I'll mark your range as complete. Thank you!
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

Reserving the last one
pfgw l9_7.log gxo9,7 a2 q3*2^5082306+1
pschoefer
ETA: 13 Apr
Thank you!!! and to everyone else who reserved a test.
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

Using the results that are coming in, there are 3 possible outcomes:
 Log file is empty.
 Log file has a factor.
3*2^5082306+1 is a Factor of GF(5082303,3)!!!! (202011.866000 seconds)
 Log file has a message & a factor.
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,7,2)!!!! (286408.437000 seconds)
It is important to know which outcome it is. So far, so good.
Thank you!
____________
 


I'm getting the impression that several tasks running on the same machine slow each other down. Anybody else experiencing the same?  

pschoeferVolunteer developer Volunteer tester
Send message
Joined: 20 Sep 05 Posts: 656 ID: 845 Credit: 1,899,545,685 RAC: 369,952

I'm getting the impression that several tasks running on the same machine slow each other down. Anybody else experiencing the same?
I noticed a slowdown as well when I started my third test. But only the tests running on core0 and core1 were slower, while the one on core3 remained as fast as before. Might be an issue with the shared L2 cache, since core0 and core1 are using the same cache.
Now my short test is done and I switched the long tests to core1 and core3. They won't be complete tomorrow because of this unexspected slowdown, but the first one will be done on tuesday, the second one on wednesday. ;)
Here's the result of the short test:
pfgw l12_1.log gxo12,1 a2 q3*2^5082306+1 pschoefer COMPLETE (none)
Output logging to file 12_1.log
GF_12: 3*2^5082306+1 5080000/5082275
Done.  

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

PuzzlePeter wrote: I'm getting the impression that several tasks running on the same machine slow each other down. Anybody else experiencing the same?
pschoefer wrote: Might be an issue with the shared L2 cache, since core0 and core1 are using the same cache.
Sadly, we are experiencing the same...and we also suspect L2 cache. We notice a 50% decrease in speed if more than 2 tests are being run on a quad.
____________
 


Sadly, we are experiencing the same...and we also suspect L2 cache. We notice a 50% decrease in speed if more than 2 tests are being run on a quad.
So I'm really sorry to tell you, that i have 8 test parallel on my V8 :(
I'm very sorry for that but the estimated deadline for the first run will be in 5 days... And there will be a second run as I have read here. So overall I will need 17 days from today to finish this 8 Test.
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

Sadly, we are experiencing the same...and we also suspect L2 cache. We notice a 50% decrease in speed if more than 2 tests are being run on a quad.
So I'm really sorry to tell you, that i have 8 test parallel on my V8 :(
I'm very sorry for that but the estimated deadline for the first run will be in 5 days... And there will be a second run as I have read here. So overall I will need 17 days from today to finish this 8 Test.
This was our first time running openPFGW on such a large number...and it's been a "painful" lesson in efficiency, or the lack of. :( Our apologies to all involved.
It looks like it would be more efficient to cancel the current tests and move them to 2 per quad. However, feel free to continue as is...it's still better than the 2 1/2 month option. :)
Please know that all work will be granted cobblestone credit.
____________
 


OK,
I have stopped the test and put it on 4 Quads with 2 WUs in parallel.
Hope thatt will be faster :)
____________
 


What's all this "but the base of 5082274 may not be correct" business? How do we (you) determine whether a factor has been found or not?
____________
There are only 10 kinds of people  those who understand binary and those who don't
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

What's all this "but the base of 5082274 may not be correct" business? How do we (you) determine whether a factor has been found or not?
It's a nuance of OpenPFGW. In previous correspondence with Wilfrid Keller, he said it's OK to ignore these comments. "The intended statement should be: no factor was found because the difference n  m = 32 has an "unreal" value." In the following example:
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,11,10)!!!! (750482.487000 seconds)
n = 5082306
m = 5082274
So we treat these results as having no factors. :)
____________
 


PFGW gxoq a2
3*2^5082306+1 is a Factor of GF(5082305? ,3)!!!!
3*2^5082306+1 is a Factor of GF(5082305,5)!!!!
3*2^5082306+1 is a Factor of xGF(5082305,5,3)!!!!
3*2^5082306+1 is a Factor of xGF(5082305? ,7,4)!!!!
3*2^5082306+1 is a Factor of GF(5082305? ,8)!!!!
3*2^5082306+1 is a Factor of xGF(5082305? ,8,3)!!!!
3*2^5082306+1 is a Factor of xGF(5082305,8,5)!!!!
3*2^5082306+1 is a Factor of xGF(5082305,9,5)!!!!
3*2^5082306+1 is a Factor of xGF(5082305? ,9,8)!!!!
3*2^5082306+1 is a Factor of GF(5082305,11)!!!!
3*2^5082306+1 is a Factor of xGF(5082305,11,3)!!!!
3*2^5082306+1 is a Factor of xGF(5082305? ,11,5)!!!!
3*2^5082306+1 is a Factor of xGF(5082305,11,8)!!!!
3*2^5082306+1 is a Factor of xGF(5082305,11,9)!!!!
3*2^5082306+1 is a Factor of xGF(5082305? ,12,7)!!!!
3*2^5082306+1 is a Factor of GF(5082305? ,3)!!!! (1215728.376000 seconds)
3*2^5082306+1 is a Factor of GF(5082305,5)!!!! (1215728.391000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,5,3)!!!! (0.000000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305? ,7,4)!!!! (0.032000 seconds)
3*2^5082306+1 is a Factor of GF(5082305? ,8)!!!! (0.032000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305? ,8,3)!!!! (0.032000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,8,5)!!!! (0.047000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,9,5)!!!! (0.000000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305? ,9,8)!!!! (0.016000 seconds)
3*2^5082306+1 is a Factor of GF(5082305,11)!!!! (0.000000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,11,3)!!!! (0.015000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305? ,11,5)!!!! (0.000000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,11,8)!!!! (0.016000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305,11,9)!!!! (0.000000 seconds)
3*2^5082306+1 is a Factor of xGF(5082305? ,12,7)!!!! (0.015000 seconds)
 

pschoeferVolunteer developer Volunteer tester
Send message
Joined: 20 Sep 05 Posts: 656 ID: 845 Credit: 1,899,545,685 RAC: 369,952

Since Cullen primes are a special form of Proth primes, the Cullen Mega Prime found yesterday might be a (x)(G)FN divisor, am I right? Are we going to test it or would that take too much time?
____________
 

rogueVolunteer developer
Send message
Joined: 8 Sep 07 Posts: 1189 ID: 12001 Credit: 18,565,548 RAC: 0

You are correct, it could be.  


Pfgw L8_5 is complete
3*2^5082306+1 is a factor of xGF(5082305,8,5) 1529.506816 Seconds
Pfgw L8_7 is Complete
xGF factor was fount, but the base of 5082274 may not be correct.
3*2^5082306+1 is a factor of xGF5082274,8,7
Pfgw L9_2 is Complete
xGF factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a factor of xGF(5082274,9,2)
Pfgw L9_5 is complete
3*2^5082306+1 is a factor of xGF(5082305,9,5)  


PFGW Version 1.2.0 for Windows [FFT v23.8]
Output logging to file 11_5.log
xGF_11_'5': 3*2^5082306+1 5080000/5082275
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,11,5)!!!! (439991.531000 seconds)
PFGW Version 1.2.0 for Windows [FFT v23.8]
Output logging to file 11_6.log
xGF_11_'6': 3*2^5082306+1 5080000/5082275
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,11,6)!!!! (440029.000000 seconds)
The rest will follow soon.
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

Since Cullen primes are a special form of Proth primes, the Cullen Mega Prime found yesterday might be a (x)(G)FN divisor, am I right? Are we going to test it or would that take too much time?
As rogue pointed out, you are correct. However, the odds of finding a Fermat Number divisor are 1/1582137:
"It appears that the probability of each prime of the form k.2^n+1 dividing a Fermat number is 1/k" (Harvey Dubner & Wilfrid Keller, "Factors of generalized Fermat numbers", Mathematics of Computation, Vol. 64, Number 209, January 1995, pp. 397405).
Since we're not in a "hurry" with this one, we'll do the "quick" test first and then determine which tests to run afterwards. Yes, it will take longer, but less computing resources will be used.
As you can see from Lennart's "quick" test here:
http://www.primegrid.com/forum_thread.php?id=1291&nowrap=true#14948
although it took almost 2 weeks to test, only the results with the ? would need further testing. It's nice to see confirmation on the 321 prime so we feel comfortable doing it this way for the Cullen.
Once the "quick" test completes, depending on how many ? there are, we may ask again for help.
____________
 


Output logging to file 10_9.log
xGF_10_'9': 3*2^5082306+1 5080000/5082275
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,10,9)!!!! (486428.766000 seconds)
Output logging to file 11_2.log
xGF_11_'2': 3*2^5082306+1 5080000/5082275
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,11,2)!!!! (489581.705000 seconds)
____________
 


5_2 done at last after several BOINCGFN induced crashes...
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,5,2)!!!! (425216.233000 seconds)
____________
There are only 10 kinds of people  those who understand binary and those who don't
 

Sysadm@NbgVolunteer moderator Volunteer tester Project scientist
Send message
Joined: 5 Feb 08 Posts: 1174 ID: 18646 Credit: 440,272,607 RAC: 127,266

as I promised:
done some 321llrworkunits with the "slow" phenom for a better benchmark
FFTLength 327680: 11.25 hours (base: 4 workunits)
FFTLength 384K: 14.5 hours (base: 7 workunits)
sorry  no more tests at the moment  I had to change the subproject because of the comming challenge ;)
____________
Sysadm@Nbg
my current lucky number: 3651*2^1521717+1
PSAPRPNetStatsURL: http://ugf.de/PRPNet/
 


Output logging to file 7_4.log
3*2^5082306+1 is a Factor of xGF(5082302,7,4) !!!! (1447.827456 seconds)
Cheers Mike  


PFGW Version 1.2.0 for Windows [FFT v23.8]
Output logging to file 11_4.log
xGF_11_'4': 3*2^5082306+1 5080000/5082275
A GF Factor was found, but the base of 5082274 may not be correct.
3*2^5082306+1 is a Factor of xGF(5082274,11,4)!!!! (281660.359000 seconds)
PFGW Version 1.2.0 for Windows [FFT v23.8]
Output logging to file 11_3.log
3*2^5082306+1 is a Factor of xGF(5082305,11,3)!!!! (281658.843000 seconds)
The last two results will be finished tomorrow morning :)
So I have all my systems for the challenge :D
____________
 


Hi,
I'm so terribly disappointed ...
These two WUs killed 3 different systems...
pfgw l10_3.log gxo10,3 a2 q3*2^5082306+1
pfgw l10_7.log gxo10,7 a2 q3*2^5082306+1
The last killing was 5 Min ago 30000 before finish!
I would like to see, that someone else crunches this two.
If this is possible, take it, otherwise I will crunch them again after the challenge.
Sorry for all that delay because of me
Jörg
____________
 

JohnHonorary cruncher
Send message
Joined: 21 Feb 06 Posts: 2876 ID: 2449 Credit: 2,681,934 RAC: 0

Hi,
I'm so terribly disappointed ...
These two WUs killed 3 different systems...
pfgw l10_3.log gxo10,3 a2 q3*2^5082306+1
pfgw l10_7.log gxo10,7 a2 q3*2^5082306+1
The last killing was 5 Min ago 30000 before finish!
I would like to see, that someone else crunches this two.
If this is possible, take it, otherwise I will crunch them again after the challenge.
Sorry for all that delay because of me
Jörg
Thanks Jörg!
We'll take these final two and see we can get them to run. Sorry for all the errors.
____________
 

Message boards :
Proth Prime Search :
(x)(G)FN Divisibility Testing 